Skip to content
Carbide snow plow blades, inserts and wear parts — engineered in Rayong, Thailand
Request a Quote
SENTHAI knowledge base

SENTHAI Knowledge Base

Field notes, specification help and wear data from the engineers who press, sinter and weld our carbide edges in Rayong.

  • Airports
  • Application
  • Blade Selection & Specification
  • Commercial & Parking Lots
Carbide snow plow blades stacked in the SENTHAI factory for the knowledge base
Storm Debrief Template: Pavement, Treatment, Plow Passes and Edge Condition in One Page Fleet Management Storm Debrief Template: Pavement, Treatment, Plow Passes and Edge Condition in One Page A storm ends and the lessons are lost because nobody writes them down in a consistent form. Read the guide How Often Do Airport Edges Get Changed? Building a Local Baseline Airports How Often Do Airport Edges Get Changed? Building a Local Baseline How often do airports change plow edges? Read the guide Plowing Pavers and Stamped Concrete: Site Walk-Through Checklist Selection & Sizing Plowing Pavers and Stamped Concrete: Site Walk-Through Checklist A contractor is asked to plow a site with brick pavers and stamped concrete, where a steel edge can catch joints and… Read the guide A School Campus Contract: Matching Edges to Bus Loops, Lots and Walks Commercial & Parking Lots A School Campus Contract: Matching Edges to Bus Loops, Lots and Walks A contractor takes a school campus with a bus loop, parking lots, walks and play areas, and wants to match equipment and… Read the guide Reviewing Safety Stock Monthly: A Maintenance Routine for Distributors Market & Supply Reviewing Safety Stock Monthly: A Maintenance Routine for Distributors How should a distributor of wear parts review safety stock each month? Read the guide Snow Emergency Plans and Depot Readiness: Why Edge Stock Belongs in the Plan Installation & Maintenance Snow Emergency Plans and Depot Readiness: Why Edge Stock Belongs in the Plan Should edge and spare-parts stock be part of a snow emergency plan? Read the guide Labelling Edges by Truck and Position: A Marking Scheme So Wear Data Follows the Edge Fleet Management Labelling Edges by Truck and Position: A Marking Scheme So Wear Data Follows the Edge A fleet changes edges often, but wear records are by truck and never by edge, so nobody knows how long a given… Read the guide Pavement Temperature Notes for Crews: A Simple Recording Card Procurement & Compliance Pavement Temperature Notes for Crews: A Simple Recording Card Why should a plow crew write down pavement temperature, and what should the card contain? Read the guide Replacing a Snow Pusher Wear Strip: Signs, Steps and Bolt-Hole Checks Setup Symptoms Replacing a Snow Pusher Wear Strip: Signs, Steps and Bolt-Hole Checks A snow pusher used on a lot shows a worn strip and the operator wonders when to replace it. Read the guide Wet, Heavy Snow: A Decision Tree for Speed, Angle and Edge Choice Setup Symptoms Wet, Heavy Snow: A Decision Tree for Speed, Angle and Edge Choice The snow turns wet and heavy and the plow starts to labour. Read the guide

Send us a blade drawing and get a quote back

Tell us the machine, the material you are clearing and the wear life you need. Our engineers reply with the edge profile, carbide grade and packing that fit the job — usually within one working day.