Skip to content
Carbide snow plow blades, inserts and wear parts — engineered in Rayong, Thailand
Request a Quote
SENTHAI knowledge base

SENTHAI Knowledge Base

Field notes, specification help and wear data from the engineers who press, sinter and weld our carbide edges in Rayong.

  • Airports
  • Application
  • Blade Selection & Specification
  • Commercial & Parking Lots
Carbide snow plow blades stacked in the SENTHAI factory for the knowledge base
Apron Surfaces: Concrete, Asphalt and Joint Seals Compared for Edge Contact Airports Apron Surfaces: Concrete, Asphalt and Joint Seals Compared for Edge Contact How do different apron pavements change what the edge meets? Read the guide Per-Push vs Seasonal Contracts: How Each Shifts Edge-Wear Risk Selection & Sizing Per-Push vs Seasonal Contracts: How Each Shifts Edge-Wear Risk How does the contract type change who carries the cost of edge wear? Read the guide When to Retire a Plow Frame and Not Just the Edge: Four Tests Cracks & Breakage When to Retire a Plow Frame and Not Just the Edge: Four Tests The edge has been replaced twice this season and the plow still performs badly. Read the guide Overnight vs Daytime Plowing: Noise Rules, Visibility and Edge Choices Cost & Budget Overnight vs Daytime Plowing: Noise Rules, Visibility and Edge Choices How do noise and visibility shape edge choice and scheduling for overnight versus daytime plowing? Read the guide Slush Plowing: Why Edges Skim and What Crews Adjust Installation & Maintenance Slush Plowing: Why Edges Skim and What Crews Adjust Why does the blade seem to ride over slush and leave a layer behind? Read the guide Ontario’s Winter Maintenance Standards: What an Outcome-Based Rule Means for Equipment Selection & Sizing Ontario’s Winter Maintenance Standards: What an Outcome-Based Rule Means for Equipment A municipal manager reads a published winter maintenance regulation and asks what it means for the plow fleet. Read the guide Segmented vs Full-Length Edges: Handling, Wear and Replacement Granularity Talk Segmented vs Full-Length Edges: Handling, Wear and Replacement Granularity When does a segmented edge reduce replacement cost compared with a full-length one? Read the guide Wing Plow Operation Basics: Reaching Over Berms Without Dragging the Edge Talk Wing Plow Operation Basics: Reaching Over Berms Without Dragging the Edge What technique keeps a wing edge from dragging when it reaches over a berm? Read the guide Rail Crossings: Flangeways, Plow Height and Edge Strike Prevention Installation & Maintenance Rail Crossings: Flangeways, Plow Height and Edge Strike Prevention How should crews handle rail crossings so the edge does not strike rails or flangeways? Read the guide Early-Season Wet Storms: Why Edges Can Wear Differently Before the Ground Freezes Selection & Sizing Early-Season Wet Storms: Why Edges Can Wear Differently Before the Ground Freezes Why do edges sometimes wear differently in the first storms of the season? Read the guide

Send us a blade drawing and get a quote back

Tell us the machine, the material you are clearing and the wear life you need. Our engineers reply with the edge profile, carbide grade and packing that fit the job — usually within one working day.