Skip to content
Carbide snow plow blades, inserts and wear parts — engineered in Rayong, Thailand
Request a Quote
SENTHAI knowledge base

SENTHAI Knowledge Base

Field notes, specification help and wear data from the engineers who press, sinter and weld our carbide edges in Rayong.

  • Airports
  • Application
  • Blade Selection & Specification
  • Commercial & Parking Lots
Carbide snow plow blades stacked in the SENTHAI factory for the knowledge base
Selection & Sizing How to size a rubber edge for a compact tractor Size a rubber edge for a compact tractor by matching three things to the mouldboard: the bolt-hole pattern (spacing and offset), the… Read the guide Selection & Sizing How to size a carbide cutting edge for a UTV plow Size a carbide cutting edge for a UTV plow by matching three things to the mouldboard: the bolt-hole pattern, the edge height… Read the guide Selection & Sizing Truck plow edges on paved lot: what changes Truck plow edges on a paved lot behave differently from edges on gravel or mixed surfaces because the carbide or steel runs… Read the guide Selection & Sizing What to record for skid steer edge wear Record four things for every skid steer edge: the wear profile across the width (not just the worst point), the remaining thickness… Read the guide Selection & Sizing How to size a reversible edge for a snow pusher Size a reversible edge for a snow pusher by matching three dimensions to the pusher’s mouldboard: the bolt-hole pattern (spacing and offset),… Read the guide Selection & Sizing How to size a steel cutting edge for a truck plow Size a steel cutting edge for a truck plow by matching four things to the mouldboard: the bolt hole pattern (spacing and… Read the guide Selection & Sizing How to size a weld-on edge for a wheel loader Size a weld-on edge for a wheel loader by measuring the mouldboard’s bottom plate first, then the existing hole pattern, then the… Read the guide Selection & Sizing Wheel loader edges on gravel: what changes On gravel, a wheel loader edge stops behaving like a snow edge and starts behaving like a wear part. The main changes… Read the guide Selection & Sizing Pickup plow edges on concrete with joints: what changes On jointed concrete, a pickup plow edge sees interrupted loading rather than steady abrasion, and that changes the failure mode: impact at… Read the guide Selection & Sizing How to size a weld-on edge for a backhoe Size a weld-on edge for a backhoe by matching three things to the parent bucket or mouldboard: the edge's overall length and… Read the guide

Send us a blade drawing and get a quote back

Tell us the machine, the material you are clearing and the wear life you need. Our engineers reply with the edge profile, carbide grade and packing that fit the job — usually within one working day.