Skip to content
Carbide snow plow blades, inserts and wear parts — engineered in Rayong, Thailand
Request a Quote

RFQ template for carbide inserts: the fields that get a fast answer

The fastest RFQ response comes from a request that states the machine, the blade or mold interface, the carbide grade and insert geometry, the annual and first-order quantities,…

The fastest RFQ response comes from a request that states the machine, the blade or mold interface, the carbide grade and insert geometry, the annual and first-order quantities, the delivery destination and Incoterm, and the acceptance criteria in one package. Buyers who send a drawing plus a quantity usually get a price. Buyers who send the full application data get a price, a tooling position, a lead time and a wear expectation. This template lists the fields that shorten that loop.

1. Machine and blade interface

The supplier cannot quote a cutting edge without knowing what it bolts onto. Machine class, blade width and thickness, bolt pattern and hole diameter determine whether your request maps to a standard edge or needs a dedicated drawing.

  • Machine make, model and model year (or plow class: light truck, municipal, loader, grader).
  • Blade or moldboard width, height and thickness, with a sketch or PDF drawing.
  • Bolt hole pattern: count, spacing, diameter, countersink type, and whether holes are slotted.
  • Mounting method: plow bolts, grader bolts, clamp-on, or pin-retained.
  • Existing part number you are replacing, if any.

Confirm exact parameters on the product page before you finalize the RFQ package.

2. Carbide grade and insert geometry

Carbide inserts are not a single commodity. Grade class, insert shape, brazing or mechanical retention, and the exposed carbide pattern all change cost and wear behavior, so the RFQ should say what you need rather than let the supplier guess.

Field What to state Why it matters
Grade class Standard wear, impact-resistant, or high-abrasion Sets carbide cost and suitable pavement or gravel use
Insert shape Round, square, rectangular, or segmented Affects coverage per edge and repairability
Retention Brazed or mechanically held Changes tooling, rework and lead time
Pattern Full face, staggered, or edge-only Drives carbide volume and price per edge
Edge profile Straight, curved, or segmented sections Determines whether a new mold is required

If you do not have a grade specification, describe the surface: asphalt, concrete, gravel, dirt, or mixed. That is enough for a first-pass recommendation. The full carbide insert range is listed at /snow-plow/carbide-inserts/.

3. Quantity, MOQ and tooling position

Quantities should be split into first order and annual forecast, because MOQ and mold amortization are usually negotiated against the annual figure, not the trial batch. State both even if the second is an estimate.

  1. First order quantity, by part number.
  2. Expected annual volume and seasonality (for example, pre-season stocking).
  3. Whether you need a sample or pilot batch before the main order.
  4. Whether an existing mold or drawing exists, and who owns it.
  5. Your target MOQ per size and per grade, if you have one.

Tooling cost, MOQ and lead time are quoted per project and are confirmed only in a formal quotation. Treat any verbal range as indicative.

4. Commercial terms and delivery

Commercial fields are where otherwise complete RFQs stall. Incoterm, destination port or warehouse, packaging standard and payment terms should appear in the first message, not the third.

  • Incoterm and named place (for example, FOB Laem Chabang or CIF to your port).
  • Destination address, including whether delivery is to a port, a distribution center or a job site.
  • Packaging: bulk, palletized, individually boxed, or private-label marked.
  • Labeling and barcode requirements for your warehouse.
  • Payment terms and currency.
  • Required delivery date or season window.

5. What this means commercially

An RFQ that omits grade, quantity split or tooling ownership usually returns a wide price band and a conditional lead time, which then costs a second and third round of emails. The practical effect is that specification gaps turn into schedule risk: a new mold can add weeks, and an unclear grade can produce an edge that wears faster or chips sooner than the fleet expects.

Total cost per plow season depends on carbide volume, edge life, change-out labor and freight weight, so the cheapest quoted unit price is rarely the lowest cost per mile plowed. Ask for the wear expectation as a range under your stated surface conditions, and compare that against your current change interval. MOQ and mold fees should be evaluated against annual volume, not the trial order. This is the same logic that applies when specifying any wear part for pavement contact, including the strike-check considerations covered in /talk/edges-and-in-pavement-lights-strike-checks/.

6. Acceptance criteria and documentation

State how you will inspect the shipment, because acceptance terms affect both price and dispute risk. Suppliers quote differently when dimensional tolerances and documentation are specified up front.

  • Dimensional tolerances on hole spacing, thickness and length.
  • Carbide insert retention check (visual, pull test, or your own standard).
  • Hardness or material certificate requirement, if any.
  • Photographs or first-article report before shipment.
  • Inspection level and who bears inspection cost.

7. A one-page RFQ checklist

Consolidate the fields above into a single attachment so the supplier can quote without a follow-up call. The checklist below is the minimum set that reliably produces a complete answer.

  1. Machine and blade drawing with bolt pattern.
  2. Grade class, insert shape, retention and pattern.
  3. First order quantity and annual forecast.
  4. Existing mold or drawing ownership.
  5. Incoterm, destination and packaging.
  6. Required delivery window.
  7. Acceptance criteria and documentation.
  8. Target price band, if you have one, clearly marked as a target.

Send the package against the specification at /snow-plow/carbide-inserts/ and request a quotation with the tooling position stated separately from the unit price.

Quick summary

A complete carbide insert RFQ states the machine and blade interface, the grade and insert geometry, the first-order and annual quantities, tooling ownership, commercial terms and acceptance criteria. Suppliers who receive all of these can return price, MOQ, tooling and lead time in one pass instead of three. Ranges for life and cost should be confirmed against your own surface conditions and change interval.

Sources checked on 2026-11-14: SENTHAI Tools product specification pages for snow plow carbide inserts; general industry practice for plow bolt patterns and wear-part procurement. Quotation, MOQ, mold cost and lead time are subject to formal quotation.

Three more perspectives

Workshop

Fabricators care most about the drawing and the bolt pattern. If hole spacing and countersink are wrong, the edge will not seat, and no grade of carbide compensates for a loose fit. Send a dimensioned drawing, not a photo.

Purchasing

Procurement needs the quantity split and the Incoterm in writing. Annual forecast drives MOQ and mold amortization, and the destination determines freight and duty. A target price is useful, but label it as a target so it is not treated as a quote.

Field

Fleet teams should state the surface mix and the current change interval. Carbide insert life varies with pavement type, operator technique and down-pressure, so a range is more useful than a single figure when comparing suppliers.

Limits

This page is a template for structuring an RFQ, not a quotation, a grade recommendation for a specific machine, or a guarantee of edge life. It does not cover customs classification, warranty terms or private-label compliance, which are handled per project. Confirm exact parameters on the product page and treat all figures as indicative until a formal quotation is issued.

Products discussed in this thread

Send us a blade drawing and get a quote back

Tell us the machine, the material you are clearing and the wear life you need. Our engineers reply with the edge profile, carbide grade and packing that fit the job — usually within one working day.