Does a Curtis-style edge fit a Meyer mount?
A Curtis-style cutting edge does not fit a Meyer mount as a direct bolt-on in most cases. The two product families were…
Read the guide
Moldboard liners and your edges
Moldboard liners are a wear-management layer, not a substitute for the cutting edge, and the right combination depends on the surface you…
Read the guide
Wear logs for fleet managers
Wear logs turn cutting edge replacement from a reaction into a schedule. For a fleet, the value is not the log itself…
Read the guide
Carbide grades: what it means for edge buyers
Carbide grade, for a cutting edge buyer, is the single specification that determines how the insert behaves in abrasion, impact and heat…
Read the guide
Wheel loader in freeze-thaw cycles: edge choices
For a wheel loader working freeze-thaw cycles, the practical default is a through-hardened or heat-treated carbon steel cutting edge in the 1–1.5…
Read the guide
Skid steer edges at a parking lot
Skid steer edges for parking lot work are selected by machine class, lot surface, and how the operator loads the bucket, not…
Read the guide
Incoterms: documents to keep
Under Incoterms 2020, the documents a buyer of snow plow cutting edges must keep are: the commercial invoice, the packing list, the…
Read the guide
Is carbide worth it on asphalt?
Yes, carbide is generally worth it on asphalt, but conditionally. Carbide cutting edges typically outlast carbon-steel or through-hardened edges by a wide…
Read the guide
Yard loader edge change: tools, time and stop points
Changing a yard loader cutting edge is a three-tool job in most cases — a socket or impact wrench for the plow…
Read the guide
Plow throws snow over the blade in freeze-thaw cycles
Snow throwing over the blade in freeze-thaw cycles is a geometry and surface condition problem, not a power problem. When meltwater refreezes…
Read the guide