Is carbide worth it on interlocking pavers?
On interlocking pavers, carbide is usually worth it only when the plow regularly rides on the surface itself, not just when the…
Read the guide
Truck plow edge change: tools, time and stop points
The realistic window for a truck plow edge change is roughly 30–90 minutes per blade position for a two-person crew, depending on…
Read the guide
Throws snow over the blade: five causes in check order
Snow throwing over the top of the blade is usually a blade-height and attack-angle problem before it is a wear problem. The…
Read the guide
Carbide and Cover Blade Setups: What the Cover Is Doing
Carbide cover snow plow blade: practical guidance for Fleet on field checks, evidence, common mistakes, specifications, and the next RFQ or operating…
Read the guide
Tariff changes for edge importers
Tariff changes affect snow plow cutting edge importers mainly through landed cost, customs classification, and origin documentation, not through the wear performance…
Read the guide
Is carbide worth it on stamped concrete?
Carbide is usually worth it on stamped concrete only when the wear pattern is abrasive and predictable; on decorative stamped flatwork it…
Read the guide
Changing an edge in wet heavy snow
Change the edge before the storm, not during it. In wet heavy snow, a worn cutting edge loses its ability to peel…
Read the guide
Plow cracks at the bolt holes in ice storm
Cracks at the bolt holes in an ice storm usually trace to one of three causes: hole-to-edge distance that is too small…
Read the guide
How to size a poly edge for a backhoe
Size a poly cutting edge for a backhoe by matching the edge to the bucket's bolt pattern, cutting width, and material section,…
Read the guide
Private-label snow pusher edges: labelling, packaging and documents
Private-label snow pusher edges are specified by drawing, not by brand: the buyer supplies the hole pattern, section profile, edge material and…
Read the guide