Skip to content
Carbide snow plow blades, inserts and wear parts — engineered in Rayong, Thailand
Request a Quote
SENTHAI knowledge base

SENTHAI Knowledge Base

Field notes, specification help and wear data from the engineers who press, sinter and weld our carbide edges in Rayong.

  • Airports
  • Application
  • Blade Selection & Specification
  • Commercial & Parking Lots
Carbide snow plow blades stacked in the SENTHAI factory for the knowledge base
Can rust staining tell us that a brazed joint has failed? Installation & Maintenance Can rust staining tell us that a brazed joint has failed? Document staining near a carbide joint without assuming failure. Preserve its location and history for a qualified assessment of the actual condition. Read the guide The steel is wearing back around intact carbide. What evidence should we send? Talk The steel is wearing back around intact carbide. What evidence should we send? Record remaining steel support around intact carbide, preserve the section evidence, and seek a design-specific serviceability review. Read the guide One blade from a batch wore out early while the rest did not. What comparison is useful? Talk One blade from a batch wore out early while the rest did not. What comparison is useful? Compare an early-worn blade with identified lots, matched exposure and consistent measurements before drawing conclusions about the whole delivery. Read the guide Several inserts cracked in a straight line. Which photographs would help an investigation? Cracks & Breakage Several inserts cracked in a straight line. Which photographs would help an investigation? Photograph aligned carbide cracks with blade-wide context, clear position labels and installation history before assigning a possible cause. Read the guide We found an insert missing but no broken pieces. Can we tell whether it fractured or pulled out? Talk We found an insert missing but no broken pieces. Can we tell whether it fractured or pulled out? Preserve an empty insert location and adjacent evidence. Learn what to record when missing fragments leave fracture versus joint loss unresolved. Read the guide A narrow strip of snow remains behind one segment. What should we check before blaming the carbide? Setup Symptoms A narrow strip of snow remains behind one segment. What should we check before blaming the carbide? Map a residual snow strip to its segment, document the fitted assembly, and compare conditions before blaming the carbide or changing the… Read the guide Only the outer end of our cutting edge is wearing quickly. What should we document? Fitment & Brands Only the outer end of our cutting edge is wearing quickly. What should we document? Map rapid wear at a blade end, record route and assembly context, and prepare a targeted inspection before changing the material specification. Read the guide What should we ask about a blade marketed as low-salt or chemical-saving? Talk What should we ask about a blade marketed as low-salt or chemical-saving? Check prospective chemical-saving blade claims by asking for a defined comparison, unchanged service outcome, relevant evidence and clear limitations. Read the guide Should snow depth alone decide whether to request a packed-ice kit? Airports Should snow depth alone decide whether to request a packed-ice kit? Specify the bonded or compacted layer and pavement context when assessing a packed-ice kit; maximum snow depth alone does not define the… Read the guide The road is freshly resurfaced. What should we confirm before a blade trial? Gravel & Industrial The road is freshly resurfaced. What should we confirm before a blade trial? Confirm road-owner restrictions and baseline conditions before trialling an edge on a newly resurfaced road, with clear damage-reporting limits. Read the guide

Send us a blade drawing and get a quote back

Tell us the machine, the material you are clearing and the wear life you need. Our engineers reply with the edge profile, carbide grade and packing that fit the job — usually within one working day.