Skip to content
Carbide snow plow blades, inserts and wear parts — engineered in Rayong, Thailand
Request a Quote
SENTHAI knowledge base

SENTHAI Knowledge Base

Field notes, specification help and wear data from the engineers who press, sinter and weld our carbide edges in Rayong.

  • Airports
  • Application
  • Blade Selection & Specification
  • Commercial & Parking Lots
Carbide snow plow blades stacked in the SENTHAI factory for the knowledge base
Our contractor must avoid marking parking-deck coatings. What evidence should an edge supplier provide? Talk Our contractor must avoid marking parking-deck coatings. What evidence should an edge supplier provide? Request a coating-specific evidence dossier for a non-marking edge claim, linking the proposed assembly to test conditions and explicit evidence gaps. Read the guide Should a bridge approach with expansion joints change our blade specification? Talk Should a bridge approach with expansion joints change our blade specification? Review bridge-joint conditions and owner restrictions with the equipment authority before changing a cutting-edge profile or trial arrangement. Read the guide We clear rough chip-seal roads. Which wear observations should guide material selection? Talk We clear rough chip-seal roads. Which wear observations should guide material selection? Use chip-seal texture, aggregate condition and location-labelled wear observations to compare edge materials under similar route exposure. Read the guide What changes in the enquiry when a road has a pronounced crown? Talk What changes in the enquiry when a road has a pronounced crown? Describe road crown and cross-width clearing evidence before evaluating an edge, then check the proposed system's documented movement and fit. Read the guide Can an edge be suitable for forward plowing but poor at backdragging? Talk Can an edge be suitable for forward plowing but poor at backdragging? Assess forward plowing and backdragging separately, checking approved accessories and configuration before attributing a poor result to edge material. Read the guide Will a thicker cutting edge solve rapid wear on a narrow contact strip? Talk Will a thicker cutting edge solve rapid wear on a narrow contact strip? Investigate concentrated contact before specifying a thicker cutting edge. Review wear location, approved setup and the proposed section's fit. Read the guide Our road changes from asphalt to gravel halfway through. How should that affect an edge enquiry? Talk Our road changes from asphalt to gravel halfway through. How should that affect an edge enquiry? Describe asphalt and gravel portions separately in an edge enquiry, including the transition, aggregate-retention goal and approved equipment limits. Read the guide Does a quiet edge automatically mean less pavement damage? Talk Does a quiet edge automatically mean less pavement damage? Evaluate noise and pavement condition separately. A quieter cutting edge does not establish a non-damaging result on the intended surface. Read the guide Should a route with raised utility covers use the same edge as a smooth road? Talk Should a route with raised utility covers use the same edge as a smooth road? Review raised utility covers as route hazards and assess the complete approved plow system before copying an edge specification from smooth roads. Read the guide Why might an edge that clears packed snow leave a wet film in slush? Talk Why might an edge that clears packed snow leave a wet film in slush? Separate packed-snow removal from slush residue when evaluating an edge. Compare conditions and approved options before diagnosing wear. Read the guide

Send us a blade drawing and get a quote back

Tell us the machine, the material you are clearing and the wear life you need. Our engineers reply with the edge profile, carbide grade and packing that fit the job — usually within one working day.