Scenario: a storm ends and the lessons are lost because nobody writes them down in a consistent form. Direct answer: use a one-page debrief with four sections, filled in within a day of the storm: pavement and weather, treatment, plow passes and edge and equipment condition. A short, regular record makes it possible to compare storms and to see what changed. The template is an example to adapt.
Template: one page
| Section | Questions |
|---|---|
| 1. Weather and pavement | Start and end time; snow type and total; air and pavement temperature trend; surface conditions at start, middle and end |
| 2. Treatment | Products used, rates and timing; pre-wet or not; any issues with bounce or run-off; quantity used |
| 3. Plow passes | Number of passes per route; time to first and last clear; routes that lagged and why; customer or 311 complaints |
| 4. Edge and equipment | Hours per truck; edge wear readings; chips or breaks; hardware or hydraulic faults; spares used |
| 5. What went well | Two items |
| 6. What to change | Two items, each with an owner and a date |
How to run the debrief
The debrief is a fifteen-minute meeting if the sheet is already filled.
- Hand the sheet to the supervisor at the end of the last shift.
- Fill sections 1 to 4 from logs and cards, so the facts are not opinions.
- Hold a 15-minute meeting with crew leads and the shop within a day.
- Agree two changes, assign owners and set dates. Two, not ten.
- File the page and review the actions before the next storm.
What to avoid
A debrief that produces blame produces silence next time.
- Blame. Record causes and fixes, not names; the next crew will not report honestly otherwise.
- Long forms. If it takes more than 20 minutes, cut it, because it will be skipped in a heavy week.
- No follow-up. An action with no owner and no date is not an action.
Using the pages
At the end of the season, lay the pages side by side. Look for repeated problems, such as the same route lagging or the same edge fault, and for effects of changes you made earlier. The pages become your record of what you learned.
Limits
This is a template with no standard behind it. Add or drop fields to suit your operation.
Boundary: No standard or data is cited; add or drop fields to suit your operation, and keep the form short enough to be completed.
Further reading on this site.
Heat Treatment of Steel Plow Edges: What Buyers Should Ask ↗Road Icing Prediction and Treatment Timing ↗Carbide snow plow blades ↗Ice Resurfacer Blades: Why They Dull and How Rinks Plan Replacement ↗Ice Building Up on the Moldboard: Causes and Practical Fixes ↗Pavement Temperature Notes for Crews: A Simple Recording Card ↗
JOMA Style Blade — Rubber-Flex Edge with Carbide Wear Segments
Carbide Snow Plow Blade for Highway and Municipal Fleets
Tungsten Carbide Inserts for Snow Plow Edges