Reading Carbide Insert Wear Patterns Before They Become Failures
Carbide insert wear patterns read properly: what flank wear, chipping and pull-out each mean, how to photograph them, and when to act…
Read the guide
Carbide Insert Dimensional Tolerance: Why Fitment Starts at the Drawing
Carbide insert tolerance and fitment: which dimensions decide whether an insert seats, how to measure them, and what a drawing has to…
Read the guide
Carbide Insert Spacing and Density: Setting Coverage Along the Cutting Edge
Carbide insert spacing and density explained: how pitch sets the load each insert carries, coverage along the edge, and the checks that…
Read the guide
What Packed Ice Does to a Standard Cutting Edge
Packed ice plow blade damage explained: why a standard edge rides and polishes, how wear flats and bounce damage form, and what…
Read the guide
Trapezoid vs Bullnose Inserts: Matching Geometry to Plow and Wear Applications
Trapezoid inserts against bullnose carbide inserts: how each geometry contacts the road, where each wears, and how to match the shape to…
Read the guide
Winter Storage and Handling for Rubber-Flex Blades: Avoiding Off-Season Damage
Rubber flex blade storage done properly: the ageing, stacking, humidity and labelling mistakes that damage an edge between seasons, and the fix…
Read the guide
Insert Retention in Flex Blades: Brazing vs Mechanical Fixing
Carbide insert retention in flex blades compared: how brazed and mechanical fixing carry plow loads, how each one fails, and how to…
Read the guide
JOMA Style Blade Cost per Season: Comparing Against Two Steel Change-Outs
JOMA blade cost per season set against two steel change-outs: the labour, downtime and route factors that decide which edge is cheaper…
Read the guide
Rubber-Flex Blade Repair and Re-Segmentation: A Fleet Workshop Decision Guide
Rubber flex blade repair and re-segmentation: which damage can be reworked, what it costs against replacement, and how workshops check bond integrity.
Read the guide
Custom JOMA Style Blades Built to Your Drawing: What to Send and What to Expect
Custom JOMA style blades built to drawing: what to send, tolerance and hole conventions, rubber and carbide choices, approval flow and lead…
Read the guide